Contact information: 

curbing888@hotmail.com; wechat: curbing1970;  Whatsapp/Mobile:+86 139 2377 4083.

Rotary furnace is to reduce the  metallic lead from Used Lead acid battery.

Material that can be charged in Rotary furnace：

1.       Paste and plate from lead acid battery,

2.       Dust from bag dust collector

3.       Slag from blast furnace

4.       Dross from lead refining kettles,

5.       Slag from painting factory

6.       Lead powder

7.       and any material containing lead

General introduction of Rotary furnace for Lead Smelting

Our Rotary furnace is designed for treatment and recovery of Lead from Lead Acid Batteries Scrap and for the reduction of Lead Sulphate, Lead Oxides, Lead Concentrates, Lead Dross and Lead Ore.

Rotary Furnace will work at temperature of about 1000-1200 ^OC. The Inside Temperature Indicator is provided on the electric control panel and the Thermo couple probe at exhaust duct of the Rotary Furnace for controlling & maintaining temperature in the furnace.

Advantages

l  Its high production capacity

l  Here battery scraps as well as Blast Furnace waste, refining Dross, Bag House powder & Lead Ore too can be processed

l  The recovery of Lead is more as compared to Blast Furnace.

l  This system is environmental friendly.

l  User friendly with less man power requirement due to less manual work.

Capacity: 2 -20 MT per batch

Technical specification of 3 MT per batch rotary furnace

 Air pollution control system

 Apart from plates and paste of lead oxide from scrap lead acid battery, slag from mini blast furnace are charged in the rotary furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted into lead. This conversion along with burning of fuel generates flue gases and flumes containing dust, dirt, oxides of lead, lead particles and such other impurities.

Hence, to meet various goals of maintaining employees’ health and factory environments as well as regulatory requirement, it becomes imperative to get  HIGH END AIR Pollution Contril Systems to be installed with Rotary Furnace.

 Please check below ILLUSTRATION for air pollution control system .