**Problem**: Abnormal machine vibrations → Likely Cause: Unbalanced load or improper installation. → **Fix**: Rebalance rotational components and ensure shafts align within 0.02mm tolerance. **Problem**: Bearings running hot → Likely Cause: Overloaded or insufficient lubrication. → **Fix**: Measure temperature rise — if >5°C above ambient, ｒｅｐｌａｃｅ oil or grease seal immediately. **Problem**: Loud, irregular noise → Likely Cause: Contamination like micro shards or glass dust inside the bearing race. → **Fix**: Stop the machine. Clean/ｒｅｐｌａｃｅ bearings ASAP to prevent catastrophic failure.
FAQ
530, diamond tool CRT recycling machine bearing selection manual
Recommend Products
Air pollution control system for Lithium battery breaking and separating plant
Four shaft shredder IC-1800 with 4-6 MT/hour capacity
Circuit board recycling machines WCB-1000C with wet separator
Dual Single-shaft-Shredder DSS-3000 with 3000kg/hour capacity
Single shaft shreder SS-600 with 300-500 kg/hour capacity
Single-Shaft- Shredder SS-900 with 1000kg/hour capacity
Planta de reciclaje de baterías de plomo-ácido
Metal chip compactor l Metal chip press MCC-002
Li battery recycling machine l Lithium ion battery recycling equipment
Lead acid battery recycling plant plant
