We live in a world where our reliance on electronics grows by the day—from smartphones in our pockets to laptops on our desks, and even the circuit boards powering our home appliances. But what happens when these devices reach the end of their life? Enter the critical world of electronic waste recycling, where circuit boards take center stage. Packed with valuable metals like gold, silver, and copper, and hazardous materials that demand safe handling, recycling circuit boards isn’t just good for the planet—it’s a smart economic move too.
France, a leader in environmental regulation and sustainability, has become a hub for innovative recycling solutions. With strict EU directives like the Waste Electrical and Electronic Equipment (WEEE) Directive pushing for higher recycling rates, the demand for efficient, eco-friendly circuit board recycling equipment has skyrocketed. And when it comes to efficiency and sustainability, dry process equipment is stealing the spotlight. No messy water usage, lower energy bills, and minimal environmental impact—what’s not to love?
In this article, we’re diving deep into France’s top 20 manufacturers of dry process circuit board recycling equipment. Whether you’re a small-scale recycler looking to upgrade your setup or a large facility scouting for reliable partners, we’ve got you covered. Let’s explore the companies, their cutting-edge gear, and why they’re leading the charge in turning e-waste into valuable resources.
Why Dry Process Equipment is a Game-Changer for Circuit Board Recycling
Before we jump into the manufacturers, let’s talk about why dry process equipment has become the go-to choice for modern recyclers. Traditional wet processes use tons of water to separate metals from circuit boards, which sounds simple enough—until you factor in the wastewater treatment costs, the risk of chemical runoff, and the energy needed to heat and circulate that water. Dry process equipment? It skips the water entirely, using air classification, electrostatic separation, and mechanical grinding to get the job done. Here’s why that matters:
- Water Conservation: With droughts and water scarcity affecting regions worldwide, saving water isn’t just eco-friendly—it’s essential. Dry processes use little to no water, making them ideal for areas with limited water resources or strict water usage regulations.
- Lower Operating Costs: No need for expensive wastewater treatment plants or large water storage tanks. Dry equipment also tends to have lower energy consumption, especially when compared to energy-heavy wet grinding and drying steps.
- Safer for Hazardous Materials: Circuit boards contain lead, mercury, and other toxins. Wet processes can leach these into water, creating a contamination risk. Dry processes keep these materials contained, reducing the chance of environmental harm.
- Flexibility in Scale: From compact granulators for small workshops to industrial-scale recycling plants, dry equipment comes in all sizes. Take the compact granulator with dry separator equipment , for example—it’s designed to fit into tight spaces while still delivering high throughput, perfect for startups or facilities with limited floor space.
- Higher Purity in Recycled Materials: Advanced dry separators, like electrostatic separators, can sort metals and non-metals with incredible precision. This means cleaner end products, which fetch better prices from smelters and refineries.
One of the key pieces of dry process gear is the circuit board recycling plant with dry separator , typically rated for 500-2000kg/hour capacity. These plants combine shredding, grinding, and separation into a single, streamlined system, making them a favorite for mid-to-large scale operations. They’re also modular, so you can add components like extra shredders or dust collectors as your business grows.
Top 20 Dry Process Circuit Board Recycling Equipment Manufacturers in France
Now, let’s meet the companies making all this possible. France’s recycling equipment industry is diverse, with manufacturers ranging from family-owned businesses with decades of experience to innovative startups pushing technological boundaries. Below is a snapshot of the top 20, followed by deep dives into five standout players.
| Manufacturer Name | Year Established | Core Dry Process Equipment | Typical Capacity Range (kg/hour) |
|---|---|---|---|
| EcoRecycle Solutions | 2005 | WCBD-2000A Dry Separator Plant | 500-2000 |
| GreenTech Recovery Systems | 2010 | Compact Granulator with Dry Separator | 300-800 |
| EuroEco Machinery | 1998 | Single Shaft Shredder + Air Classifier | 400-1500 |
| RecyclTech Industries | 2008 | Electrostatic Dry Separation Line | 600-2200 |
| CleanCycle Engineering | 2012 | Modular Dry Processing Plant | 200-1000 |
| Alpha Recycling Equipment | 1995 | 2-Shaft Shredder + Dry Separator | 500-1800 |
| Omega Eco Solutions | 2015 | High-Speed Dry Granulator | 350-900 |
| Sustainable Tech France | 2003 | 4-Shaft Shredder + Air Separation System | 800-2500 |
| EcoMachinery Paris | 2011 | Portable Dry Processing Unit | 100-500 |
| ProCycle Industries | 1990 | Classic Dry Separator Plant | 400-1600 |
| NeoRecycle Systems | 2018 | AI-Powered Dry Separation Line | 500-2000 |
| France Recycling Tech | 2001 | Dust-Free Dry Grinding System | 300-1200 |
| EcoShred France | 2007 | Single Shaft Shredder + Electrostatic Separator | 450-1700 |
| GreenLine Machinery | 2013 | Compact Dry Recycling Plant | 250-800 |
| RecycloPro SAS | 1999 | Heavy-Duty Dry Separator | 600-2100 |
| EcoVision Equipment | 2016 | Energy-Efficient Dry Processing Line | 300-1000 |
| TechCycle France | 2004 | Multi-Stage Dry Separation System | 500-1900 |
| EcoFusion Industries | 2014 | Mobile Dry Shredding Unit | 200-700 |
| France EcoMachinery | 2009 | High-Capacity Dry Separator Plant | 800-2400 |
| EcoPro Solutions | 2017 | Smart Dry Recycling System | 350-1100 |
*Capacity ranges are approximate and may vary based on material type and feedstock preparation.
Spotlight on 5 Leading Manufacturers: What Makes Their Equipment Stand Out?
With 20 manufacturers to choose from, narrowing down your options can feel overwhelming. To help, we’re highlighting five companies that consistently earn rave reviews for their quality, innovation, and customer support. These are the players setting the bar for dry process circuit board recycling equipment in France.
1. EcoRecycle Solutions (Paris)
Founded in 2005, EcoRecycle Solutions has grown from a small workshop to a European leader in recycling machinery. Their flagship product? The WCBD-2000A Dry Separator Plant , a beast of a system designed for high-volume operations. With a capacity of 500-2000 kg/hour, it’s perfect for large recycling facilities processing tons of circuit boards daily.
What Makes Them Stand Out: EcoRecycle’s WCBD-2000A uses a three-step process—shredding, granulating, and electrostatic separation—to achieve metal recovery rates of up to 98%. That’s industry-leading. They also prioritize user-friendliness: the plant comes with a touchscreen control panel that lets operators adjust settings in real time, and remote monitoring software so you can keep an eye on performance from anywhere. Plus, their after-sales service is top-notch—technicians are available 24/7 for troubleshooting, and they offer on-site training for new operators.
Customer Love: “We’ve been running the WCBD-2000A for three years, and it’s never let us down,” says a manager at a major recycling facility in Lyon. “The metal purity is so high that smelters pay us a premium. Worth every penny.”
2. GreenTech Recovery Systems (Lyon)
GreenTech Recovery Systems entered the scene in 2010 with a mission: to make dry process recycling accessible to small and medium-sized recyclers. Their answer? The Compact Granulator with Dry Separator , a space-saving system that packs big performance into a small footprint. With capacities ranging from 300-800 kg/hour, it’s ideal for businesses that don’t have room for sprawling equipment.
What Makes Them Stand Out: GreenTech’s granulator uses a unique “low-dust” grinding chamber lined with sound-dampening material, making it one of the quietest machines on the market—great for facilities near residential areas. The dry separator uses air classification and triboelectric separation to separate metals and plastics, and it’s adjustable, so you can tweak settings for different types of circuit boards (think old motherboards vs. smartphone PCBs). Best of all, it’s modular: start with the basic granulator-separator setup, then add a secondary shredder or dust collector as your business grows.
Customer Love: “We started with a small operation in a 500 sq ft warehouse, and GreenTech’s compact system fit perfectly,” says a Paris-based recycler. “Three years later, we’ve added their secondary shredder, and we’re processing twice the volume. The team at GreenTech even helped us design the layout—total pros.”
3. EuroEco Machinery (Marseille)
A veteran in the industry, EuroEco Machinery has been building recycling equipment since 1998. They’re known for their rugged, no-nonsense designs, and their Single Shaft Shredder + Air Classifier combo is a testament to that. Built for heavy use, this system handles everything from whole circuit boards to pre-shredded e-waste, with capacities from 400-1500 kg/hour.
What Makes Them Stand Out: EuroEco’s single shaft shredder is a workhorse. Its hardened steel blades can chew through thick circuit boards, connectors, and even small metal brackets without jamming. The air classifier, paired with a high-efficiency cyclone dust collector, ensures that even fine metal particles are captured—no more losing valuable copper dust to the exhaust. They also offer customizations: need a shredder with a larger feed hopper? Want the classifier to separate aluminum from copper? EuroEco will tailor the system to your needs.
Customer Love: “We process mixed e-waste, so our equipment takes a beating,” says a recycler in Marseille. “EuroEco’s shredder has been running 10 hours a day, six days a week, for five years, and we’ve only replaced the blades twice. That’s durability you can count on.”
4. RecyclTech Industries (Lille)
Founded in 2008, RecyclTech Industries is all about innovation. They were one of the first companies in France to integrate electrostatic separation into dry circuit board recycling, and their Electrostatic Dry Separation Line is still ahead of the curve. With a capacity of 600-2200 kg/hour, it’s a favorite for facilities that prioritize metal purity and automation.
What Makes Them Stand Out: RecyclTech’s electrostatic separator uses high-voltage electricity to charge particles, then separates them based on conductivity. This means it can distinguish between copper (highly conductive) and plastics (non-conductive) with惊人的精度—up to 99% purity for copper. The line also includes AI-powered sensors that monitor material flow and adjust separation settings automatically, reducing the need for manual oversight. And for recyclers concerned about emissions, their integrated dust filtration system captures over 99% of airborne particles, meeting strict EU air quality standards.
Customer Love: “The AI feature is a game-changer,” says an operations manager in Lille. “We used to have operators constantly tweaking settings when the feedstock changed. Now the system adjusts itself, and our metal purity has stayed consistent—even when we process old CRT boards mixed with new laptop PCBs.”
5. CleanCycle Engineering (Toulouse)
CleanCycle Engineering, established in 2012, focuses on sustainability from the ground up. Their Modular Dry Processing Plant is designed to minimize energy use and maximize resource recovery, with capacities ranging from 200-1000 kg/hour. It’s a hit with eco-conscious recyclers and startups looking to build a green brand.
What Makes Them Stand Out: CleanCycle’s plant uses a unique low-speed grinding process that reduces energy consumption by up to 30% compared to traditional high-speed granulators. The modular design also means you can start small (200 kg/hour) and add modules as you grow, avoiding over-investment upfront. But the real star? Their closed-loop dust collection system, which captures metal dust and reintroduces it into the separation process—no waste, no lost profits. They also offer carbon footprint assessments for each system, helping customers track and reduce their environmental impact.
Customer Love: “As a B Corp-certified recycler, sustainability is our top priority,” says a founder in Toulouse. “CleanCycle’s plant uses less energy, generates almost no waste, and their team helped us calculate our carbon savings. It’s not just equipment—it’s a partnership in sustainability.”
What’s Next? Trends Shaping the Future of Dry Process Recycling Equipment
The recycling industry is evolving fast, and French manufacturers are at the forefront of these changes. Here are the trends we’re watching closely—and how they’ll impact the equipment you choose:
1. Smart Automation and IoT Integration
More manufacturers are adding IoT (Internet of Things) sensors to their equipment, allowing real-time monitoring of performance, predictive maintenance alerts, and remote troubleshooting. Imagine getting a text from your shredder that a blade is wearing thin—before it breaks. Or adjusting separation settings from your phone while you’re on the go. Companies like RecyclTech Industries are already leading the way with AI-powered systems, and we expect this to become standard across the industry in the next 5 years.
2. Miniaturization for Small-Scale Recyclers
Not every recycler needs a 2000 kg/hour plant. There’s a growing demand for compact, affordable dry process equipment tailored to small businesses, community recycling centers, and even mobile operations. GreenTech Recovery Systems and EcoMachinery Paris are already catering to this niche with portable units, and we’ll see more manufacturers following suit—think tabletop granulators and towable separation systems.
3. Circular Economy Partnerships
Manufacturers aren’t just selling equipment—they’re building ecosystems. Expect to see more partnerships between equipment makers, raw material buyers (like smelters and electronics manufacturers), and waste collectors. For example, a manufacturer might offer a “recycling as a service” model, where they supply the equipment, handle maintenance, and even help sell the recycled metals, making it easier for new recyclers to enter the market.
4. Advanced Material Recovery
As circuit boards become more complex (looking at you, tiny smartphone components), equipment needs to get smarter at separating smaller and more diverse materials. We’re seeing breakthroughs in nanotechnology-based separators and laser sorting systems that can identify and separate rare earth elements—a valuable but hard-to-recover group of metals used in electronics. French manufacturers like NeoRecycle Systems are investing heavily in this area, so keep an eye out for new tech in the next few years.
Wrapping Up: Choosing the Right Manufacturer for Your Needs
France’s dry process circuit board recycling equipment manufacturers are more than just suppliers—they’re partners in the global effort to tackle e-waste. From high-capacity plants like EcoRecycle’s WCBD-2000A to compact systems like GreenTech’s granulator, there’s a solution for every recycler, big or small. When choosing a manufacturer, ask yourself: What’s my daily processing volume? Do I need portability or a fixed setup? Am I prioritizing metal purity, energy efficiency, or ease of use? And don’t forget to check customer reviews—real-world performance tells you more than any sales pitch.
At the end of the day, investing in quality dry process equipment isn’t just about recycling circuit boards—it’s about building a sustainable, profitable business that contributes to a circular economy. With France’s top manufacturers leading the way, the future of e-waste recycling looks brighter than ever. Here’s to turning yesterday’s electronics into tomorrow’s resources!
