Your One-Stop Partner for E-Waste Recycling Equipment and Turnkey Plants

The Growing Challenge of E-Waste and Battery Waste

Electronic waste represents one of the fastest-growing waste streams on the planet. Discarded smartphones, laptops, refrigerators, and batteries contain valuable metals like copper, aluminum, lead, nickel, and cobalt, yet much of this material still ends up in landfills. For entrepreneurs and established recycling companies alike, the opportunity is clear: capture these resources with the right recycling equipment and turn environmental responsibility into sustainable profit.

However, not all recycling machinery is created equal. Success depends on choosing a partner that understands the complete process, from raw material intake to final purified output, and can deliver equipment that meets local environmental standards while maximizing recovery rates.

Lead Acid Battery Recycling Equipment for Maximum Lead Recovery

Used lead acid batteries remain one of the most recycled consumer products globally, and for good reason. The lead inside holds significant value, while improper disposal creates severe environmental hazards. San Lan's complete lead acid battery recycling equipment line handles every stage of the process safely and efficiently.

The system begins with the HBC-045 hydraulic battery cutter, which slices batteries into four parts and empties acid in just 45 seconds per piece. The breaking and separation plant then classifies material into four streams: lead grid, lead paste, PVC/PP plastic, and hard rubber, operating at 1-10 MT per hour. For lead paste processing, the de-sulfurization unit removes sulfur from PbSO4, reducing melting temperature and SO2 emissions while saving energy and additives.

Smelting options include both blast furnace configurations achieving 95% lead recovery at 40-100 MT per 24 hours, and rotary furnace systems that offer even higher recovery rates than traditional blast designs. Crude lead moves to the refinery kettle furnace, where near-infrared electric heating produces 99.999% pure lead with 30-50% energy savings over conventional methods. Complete air pollution control and water treatment systems ensure the entire facility meets strict environmental requirements.

Lithium Battery Recycling Equipment for the New Energy Era

The electric vehicle revolution has created an unprecedented surge in lithium-ion battery production, and with it, an approaching wave of end-of-life batteries that must be handled responsibly. San Lan's li battery recycling equipment transforms this challenge into a valuable resource recovery opportunity.

The lithium battery recycling plant processes 500-2500 kg per hour through a carefully engineered sequence: discharging, pre-crushing, secondary granulation, black powder separation, and magnetic separation of iron and steel. The result is clean separation of black mass containing nickel, cobalt, and graphite, alongside recoverable plastic, copper, and aluminum fractions. An integrated air pollution control system absorbs and neutralizes harmful gases before atmospheric release, while a pneumatic conveying system and hydraulic briquetter handle plastic film waste with a 10:1 volume compression ratio.

Cable and Circuit Board Recycling Equipment for Metal Recovery

Scrap cable and printed circuit boards represent two of the richest urban mining sources available. San Lan offers both dry and wet separation technologies to match different operational needs and local regulations. The cable recycling equipment line includes compact granulators with dry separators, wet process systems, and dedicated scrap cable strippers handling diameters from 1.5mm to 150mm. These systems efficiently separate copper and aluminum from plastic insulation, producing clean metal fractions ready for direct smelter delivery.

For circuit board processing, San Lan provides multiple plant configurations from 300 kg/hour to 2000 kg/hour using either air separation or wet metal separation. The WCBD-2000A air separation plant achieves 95% recovery rates with copper powder purity reaching 96-98%, while wet separation options like the WCB-2000C can process boards still carrying electronic components. Both configurations incorporate pulse bag dust collectors and cyclone separators to maintain a clean working environment.

Why San Lan Technologies Stands Apart

In a crowded market of equipment suppliers, San Lan distinguishes itself through genuine engineering depth and comprehensive project support. The technical team includes master's degree-level mechanical engineers with over 15 years of hands-on experience specifically in e-waste recycling machinery design and optimization.

One-Stop EPC Service: From Concept to Commissioning

Many equipment suppliers simply sell machines and leave customers to figure out integration, installation, and optimization alone. San Lan takes a different approach with full EPC capabilities, Engineering, Procurement, and Construction, delivered as an integrated package. The process begins with understanding your specific waste stream composition, target capacity, available space, and local regulatory requirements. From there, San Lan engineers customize plant layout and equipment configuration, source auxiliary systems, supervise installation, and commission the complete line until it meets designed throughput and recovery specifications.

This turnkey model reduces project risk, accelerates time-to-production, and eliminates the coordination headaches of dealing with multiple vendors. Whether you are a first-time recycler entering the industry or an established operator expanding capacity, the single-point-responsibility approach ensures accountability at every stage.

Proven Across 21+ Countries Worldwide

San Lan's equipment currently operates in diverse markets including Singapore, Colombia, Vietnam, Mexico, Argentina, Korea, Malaysia, Indonesia, South Africa, Tunisia, India, Kenya, Saudi Arabia, Philippines, Zambia, and Israel. This global footprint demonstrates the adaptability of San Lan's designs to different waste compositions, climate conditions, voltage standards, and regulatory frameworks. Each installation adds to the company's practical knowledge base, which feeds back into continuous product improvement.

Beyond Standard Equipment: Specialized Solutions

San Lan's product portfolio extends well beyond batteries, cables, and circuit boards to cover nearly every category of e-waste and recyclable material. The CRT recycling line safely cuts and separates cathode ray tube monitors, collecting phosphor powder while separating panel and funnel glass. Refrigerator and air conditioner recycling plants extract refrigerant gases before shredding and separating metals, plastics, and polyurethane with recovery rates exceeding 90%. Motor recycling equipment dismantles stators to extract copper windings, while hydraulic press machines and metal melting furnaces complete the value chain by densifying and refining recovered materials into salable commodities.

For mining operations, San Lan even offers lithium ore extraction plants processing 500-5000 MT per day, with tailings extraction achieving 75% total recovery compared to the 65% industry average.